NEWS

1. The variable angle support bracket combination of the handheld machine. Handheld endoscopes are usually lighter, and the purpose of configuring the bracket is to give the examiner more flexible choices, and the variable angle can make the examiner more comfortable to use.

2. Rigid casing and handle. The soft insertion part of the industrial video endoscope makes it capable of more inspection tasks, but when inspecting the air inlet, nozzle, etc., you may encounter some troubles. The use of rigid sleeves and handles can increase The hardness of the inserted part makes it easier to operate.

3. Objective lens adapter lens and storage box. The objective lens of the Waring MViQ video endoscope can be flexibly replaced, front-view lens, side-view lens, observation lens, observation and measurement integrated lens...Equipped with different types of lenses, it can be added for on-site inspection More flexibility, convenient operation and better detection results.

4. Clean the kit. It contains cleaning and wiping products with specific alcohol concentration, such as ordinary cotton swabs, pointed cotton swabs, etc., which can facilitate the examiner to clean the objective lens adapter lens at any time and provide protection for clear imaging.

5. Manipulator device. Foreign objects in pipes and equipment are sometimes irrelevant, and sometimes may cause accidents, especially foreign objects in aircraft engines, which must be cleaned up in time. The manipulator device can enter the pipeline or equipment along with the probe, and by controlling the loosening and tightening of the gripping device (three-wire claw or sling) on the top of the manipulator, it can grasp foreign objects, and finally complete the cleaning task with the probe withdrawal.

6. Turn the tool. This auxiliary tool is optional for hole inspection, because traditional engine endoscopic inspection requires two people to work together. One operator rotates the engine with a wrench, and one operator observes through an endoscope in order to observe each blade. , The operator needs to turn the engine back and forth, which is a slow and tedious process. Using a rotating tool with a built-in electric motor, you can select manual control or automatic blade rotation mode, and one operator can independently complete the inspection task of hundreds of blades on the turbine/compressor.